NETGOODS is harleycruisecontrol.com
Set Coast Resume Accelerate
is maintained by Netgoods™ LLC
|Softail||Road King||Electra Glide, Street Glide, Road Glide||Dyna's|
|Home||Installation||Comparison||How it works||Products - photos|
|F A Qs||Idle cables||Our chrome||Indicator lights||Compatibility Issues|
||Return Policy||old softail info|
|These items are reported to be incompatible with our cruise control installation kit:|
|For 2004-2006 carbureted
bikes, we use the stock speedometer for the tachometer
signal. If you have replaced the stock speedometer with the
combination speedo/tach, we need to know so that we can build you a
|All Road King Police
bikes 2004 - 2011 use the stock speedometer
(pin number 3) for the tach signal.
|Kuryakyn adjustable passenger foot pegs. These pivoting footpeg will come in contact with the decorative chrome cover (Softails only).|
|Softails only: LED brake
light issue is resolved as of 10/4/2006. Order the Brake light Simulator from the order
page. This kit lets the cruise
operate with LED brake lights. (Applies to
Softails only, not
needed for touring bikes)
|Brake light flashers See below.
|Mikuni carburetor cruise brackets from Rivera Engineering, when used with Arlen Ness Big Sucker air cleaner. The backing plate for the air cleaner is extra deep and the cruise bracket hits the backing plate not letting the carburetor open and close properly. You will have to change to a different air cleaner setup, such as the Screamin Eagle.|
|Netgoods™ LLC is not affiliated with Harley Davidson®|
image is a copyright of Kuryakyn
|Here is what Kuryakyn
says on there web page.......
"Important: P/N 4859 is not compatible with aftermarket or accessory modules that alter the functions of the stock taillight and turn signals. If you have already made modifications to your bikes taillight and/or turn signals, you will have to return your bike to stock form before installing our Controller.
Bikes equipped with factory security system and low-draw L.E.D. lights also require P/N 4857 - Alarm Compatible Load Equalizer."
If you have this installed, you MUST use our brake bulb simulator. Our brake bulb simulator must be installed in front of (ahead of) part 4859. This probably applies to any and all brake light flashers.
LLC products are American
WARNING: Use of this product will increase your riding pleasure!
Netgoods™ LLC is a registered trademark.
registered trademark serial number 86338418
Unauthorized use is a violation of federal law.
Copyright www.netgoods.com® ©, Netgoods™LLC
|Patents Pending||NO MORE THROTTLE LOCKS ! No more hand cramps ! Ride longer with more comfort ! Ride safer !|